化学修饰碳糊电极测定废水中痕量铜

研制了732型阳离子交换树脂碳糊修饰电极,在盐酸－乙二胺体系中,对Cu（Ⅱ）显示出良好的离子交换和选择性,电极具有很好的重现性和较长的使用寿命,可用于废水中痕量铜的测定。     

Inter-annual variability of ecosystem production in boreal jack pine forests (1975-2004) estimated from tree-ring data using CBM-CFS3

We describe and apply a method of using tree-ring data and an ecosystem model to reconstruct past annual rates of ecosystem production. Annual data on merchantable wood volume increment and mortality obtained by dendrochronological stand reconstruction were used as input to the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3) to estimate net ecosystem production (NEP), net primary production (NPP), and heterotrophic respiration (Rh) annually from 1975 to 2004 at 10 boreal jack pine (Pinus banksiana Lamb.) stands in Saskatchewan and Manitoba, Canada. From 1975 (when sites aged 41-60 years) to 2004 (when they aged 70-89 years), all sites were moderate C sinks except during some warmer than average years where estimated Rh increased. Across all sites and years, estimated annual NEP averaged 57 g Cm⁻² yr⁻¹ (range −31 to 176 g Cm⁻² yr⁻¹), NPP 244 g Cm⁻² yr⁻¹ (147-376 g Cm⁻² yr⁻¹), and Rh 187 g Cm⁻² yr⁻¹ (124-270 g Cm⁻² yr⁻¹). Across all sites, NPP was related to stand age and density, which are proxies for successional changes in leaf area. Regionally, warm spring temperature increased NPP and defoliation by jack pine budworm 1 year previously reduced NPP. Our estimates of NPP, Rh, and NEP were plausible when compared to regional eddy covariance and carbon stock measurements. Inter-annual variability in ecosystem productivity contributes uncertainty to inventory-based assessments of regional forest C budgets that use yield curves predicting averaged growth over time. Our method could expand the spatial and temporal coverage of annual forest productivity estimates, providing additional data for the development of empirical models accounting for factors not presently considered by these models.     

简易水处理活性炭的选择和应用方法

首先介绍活性炭性能测试与水处理活性炭选炭、吸附技术选择、工艺应用的关系,其次报导两个活性炭选用方面的改进方法。通过重新定义、整合、完善现有活性炭性能指标,建立了以酚值、碘值、亚甲基蓝、丹宁酸值为吸附性能指标的选炭方法。这四种指标化合物的分子量与直径覆盖了大多数有机污染物的范围,用此法可减少活性炭应用测试的炭型。在活性炭精选和吸附工艺应用研究中,用微型炭柱进行穿透实验可弥补缩小式传统型、小型炭柱的不足。相对于国外现用微型柱的实验方法,文中介绍的微型柱快速穿透（MCRB）方法的设备要求较低,操作简单,可以在国内大多数实验室中进行;遇过对多种污染物质的实验结果,建立了MCRB方法的可信性和适用性。这两种新方法完善了活性炭水处理研究的实验体系,可降低其应用于水与污水处理的成本,有利于中国的环境保护。     

Reduction of CO2 emission by optimally tracking a pre-defined target

The recent global financial crisis has highlighted the need for balanced and efficient investments in the reduction of the greenhouse effect caused by emissions of CO₂ on a global scale. In a previous paper, the authors proposed a mathematical model describing the dynamic relation of CO₂ emission with investment in reforestation and clean technology. An efficient allocation of resources to reduce the greenhouse effect has also been proposed. Here, this model is used to provide estimates of the investments needed in land reforestation and in the adoption of clean technologies for an optimum emission and abatement of CO₂, for the period of 1996–2014. The required investments are computed to minimize deviations with respect to the emission targets proposed in the Kyoto Protocol for European Countries. The emission target can be achieved by 2014 with investments in reforestation peaking in 2004, and a reduction of the expected GDP of 42%, relative to 2006. Investments in clean technology should increase between 2008 and 2010 with maximum transfer figures around 70 million American dollars. Total (cumulative) costs are, however, relatively high depending on the price of carbon abatement and the rate at which the expected CO₂ concentration in the atmosphere should be reduced. Results highlight the advantages for policy makers to be able to manage investments in climate policy more efficiently, controlling optimum transfers based on a portfolio of actions that tracks a pre-defined CO₂ concentration target.     

A multi-mutualist simulation: Applying biological market models to diverse mycorrhizal communities

We present a cellular automaton that simulates the interaction between a host tree and multiple potential mycorrhizal symbionts and generates testable hypotheses of how processes at the scale of individual root tips may explain mycorrhizal community composition. Existing theoretical biological market models imply that a single host is able to interact with and select from multiple symbionts to organize an optimal symbiont community. When evaluating the tree–symbiont interaction, two scales must be considered simultaneously: the scale of the entire host plant at which carbon utilization and nutrient demands operate, and the scale of the individual root tip, at which colonization and carbon-nutrient trade occurs. Three strategies that may be employed by the host tree for optimizing carbon use and nutrient acquisition through mycorrhizal symbiont communities are simulated: (1) carbon pool adjustment, in which the plant controls only the total amount of carbon to be distributed uniformly throughout the root system, (2) symbiont selection, wherein the plant opts either for or against the interaction at each fine root tip, and (3) selective carbon allocation, wherein the plant adjusts the amount of carbon allocated to each root tip based on the cost of nutrients. Strategies were tested over various nutrient availabilities (the amount of inorganically and organically bound nutrients). Success was defined on the basis of minimizing carbon expended for nutrient acquisition because this would allow more carbon to be utilized for growth and reproduction. In all cases, the symbiont selection and selective carbon allocation strategies were able to meet the nutritional requirements of the plant, but did not necessarily optimize carbon use. The carbon pool adjustment strategy is the only strategy that does not operate at the individual root tip scale, and the strategy was not successful when inorganic nutrients were scarce since there is no mechanism to exclude suboptimal symbionts. The combination of the symbiont selection strategy and the carbon pool adjustment resulted in optimal carbon use and nutrient acquisition under all environmental conditions but result in monospecific symbiont assemblages. On the other hand, the selective carbon allocation strategy is the only strategy that maintained successful, multi-symbiont communities. The simulations presented here thus imply clear hypotheses about the effect of nutrient availability on symbiont selection and mycorrhizal community richness and composition.     

Experimental study on the suppression of gas explosion using the gas–solid suppressant of CO2/ABC powder

Gas explosion is the leading accident in underground coal mining in China. Using the self-improved 20 L spherical experimental system, the impacts of 8% CO₂, ABC powder at various concentrations and mixture of them on the suppression of mine gas explosion were investigated. The results indicate that cooperative synergism exists between ABC powder and CO₂. Their combination has a better effect than each of the two components acting alone, especially for the gas of larger concentration. When 0.25 g/L ABC powder was mixed with 8% CO₂, the explosion limits were reduced by about 55%, the time to reach the peak explosion pressure was prolonged 3.56 times on average. Meanwhile, the maximum explosion pressure declined on an average of 59.4% and the maximum explosion overpressure rising rate decreased on an average of 91.1%. A combination of 0.20 g/L ABC powder and 8% CO₂ completely suppressed 11% gas explosion. The explosion suppression mechanism of CO₂ and ABC powder were probed theoretically. CO₂ plays a key part in the whole explosion processes, and it can effectively suppress the forward reaction between gas and oxygen. While it is during the middle-later period of explosion processes that ABC powder plays a critical role. The particles decomposed from heated ABC powder such as nitrogen and phosphor will react with free radicals rapidly. Besides, atoms as N, P are capable of participating in chain reaction and reacting with active groups, significantly suppressing the gas explosion.     

Power system planning with emission constraints: Effects of CCS retrofitting

Today, the world's energy needs are still supplied mainly from fossil fuel based resources. This is true for electricity generation as well, thus making the power sector responsible for 45% of greenhouse gas emissions. The present climate crisis has made it necessary to minimise emissions in power generation, with low-carbon energy sources taking on greater significance in recent years. However, most low-carbon sources have inherent problems, like intermittency and high capital expenditure. A suitable alternative is carbon capture and storage (CCS) technology which allows continued fossil fuel-based electricity generation at much lower rates of emission. Two approaches are possible in the deployment of CCS technology. The first is to introduce new power plants equipped for carbon dioxide (CO₂) capture, while systematically shutting down existing coal power plants. Another is to retrofit existing power plants for CO₂ capture. These approaches are compared in this work. The study shows that allowing CCS retrofitting of existing power plants can reduce the overall cost requirement significantly. In addition, a sensitivity analysis is also done to study the effect of nuclear energy on the overall energy mix.     

Non-equilibrium phenomena in carbon dioxide expansion

Release of liquid and supercritical carbon dioxide is a fundamental research topic in CCS. Traditional approach is largely based on HEM and, in general, assumes equilibrium from the outlet to the Mach disc. Experimental results have shown that this approach is not always effective in describing the expansion phenomenon; therefore a significant lack of knowledge exists about CO₂ properties at the under-expanded jet zone boundary, which is a main focus in process safety. Here, solid formation, vapour quality, sonic velocity and final temperature are generally calculated according to equilibrium saturation condition, and this is generally incorrect. This article deals with non-equilibrium thermodynamics of liquid and supercritical CO₂ expansion, illustrating relaxation dynamics through the HRM models, and discussing the very specific singularities of CO₂ phase transitions, vapour to liquid and liquid to solid, that result away from the equilibrium condition, due to the rapid phase changes and to the specific properties of CO₂ multi phase thermodynamics, including nucleation and particle growth. Statistical rate theory has been applied with the aim at identifying the phase transition energy barrier, resulting in a significant entropy increase. A case study based on HEM conservation equations integrated with the statistical rate approach has been presented, which covers the gap of the equilibrium hypothesis. The objective of the article is to provide a more accurate method to predict the properties of carbon dioxide following an expansion.     

A risk assessment methodology for high pressure CO2 pipelines using integral consequence modelling

This paper presents a risk assessment methodology for high pressure CO₂ pipelines developed at the Health and Safety Laboratory (HSL) as part of the EU FP7 CO2Pipehaz project. Until recently, risk assessment of dense phase and supercritical CO₂ pipelines has been problematic because of the lack of suitable source term and integral consequence models that handle the complex behaviour of CO₂ appropriately. The risk assessment presented uses Phast, a commercially available source term and dispersion model that has been recently updated to handle the effects of solid CO₂. A test case pipeline was input to Phast and dispersion footprints to different levels of harm (dangerous toxic load and probit values) were obtained for a set of pipeline specific scenarios. HSL's risk assessment tool QuickRisk was then used to calculate the individual and societal risk surrounding the pipeline. Knowledge gaps that were encountered such as: harm criteria, failure rates and release scenarios were identified and are discussed.